TCT Tutto Peening Bit

Pedros Campy Peening Bit for Pro Chain Tool 3.0 – 3.2 and Tutto Chain Tool

Replacement Peening Bit for Tutto Multi-Chain Tool and Pro Chain Tool
Heat-Treated S2 Tool Steel
For Pedro’s Tutto Multi-Chain Tool
Includes one replacement peening bit
Replacement RPG fits the following chain tools:
6460340-Tutto Chain Tool
6460341-Tutto Chain Tool II
6460330-Pro Chain Tool 3.0
6460331-Pro Chain Tool 3.1
6460332-Pro Chain Tool 3.2

Read More
Pedros Chain Pig Guts

Pedros Chain Pig Guts

Chain Pig Rebuild Kit
Make your Chain Pig like new again! The Pig Guts – Chain Pig Rebuild Kit, includes a full set of internal cleaning components:

3 Brush Wheels
2 Outer Brushes
1 Sponge

Read More
Pedros Pins short (2 spares) for Apprentice Chain Tool 1.0 - 1.1 , Pro Chain Tool 1.0 - 2.0 , Shop Chain Tool 1.2

Pedros Chain Tool Replacement Parts

Replacement Parts for Pedro’s Chain Tools.
Includes two pins made from heat-treated S2 Tool Steel, one brass pin retention nut, and one stainless steel ball bearing.

Pins and pin retention nut fit the following tools:

6460350-Pro Chain Tool (Pre-2008)
6460360-Pro Chain Tool 2.0
6460320-Apprentice Chain Tool 1.0
6460321-Apprentice Chain Tool 1.1
6460322-Shop Chain Tool
(6460330, 31, 32 Pro Chain Tool use the long pin – 6460340TCT-06)

Ball bearing fits the following tools:
6460322-Shop Chain Tool
6460332-Pro Chain Tool 3.2
6460340-Tutto Chain Tool (limited 2021 units)
6460341-Tutto Chain Tool II

Read More
Pedros Domestique and Prestige Hose and Twin Valve Pump Head

Pedros Domestique and Prestige Hose and Twin Valve Pump Head

Replacement head and hose for current Domestique or Prestige floor pumps

Can be retrofit to older Domestique and Prestige by swapping insert from old hose.

Dual presta/schrader head with thumb-lock lever.

Our current replacement head and hose can be retrofitted onto older Domestique and Prestige models. The process is:

Unscrew the cap where the hose is currently mounted to the pump (next to the gauge) and pull the hose out.

You should see a small insert in the end of the hose. Remove that insert and the cap from the old hose and install into/onto the new hose.

Reinstall hose and secure by tightening the cap.

Read More